Skip to end of banner
Go to start of banner

Installation of Inspera Scan

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Inspera Scan is Inspera's Handwriting Scan Examination Software, which enables you to easily scan drawings with colors, preview drawings, and re-register question codes.

In norwegian

/wiki/spaces/NO/pages/147554468

Installation of scanner on PC


Download the installation file "InsperaScan Installasjon" - If you have not received this, please contact support@inspera.no

The file contains three subfolders:

  • Driver Installasjon
  • Scantoolplug Installasjon
  • InsperaScan Installasjon

Step 1

Install Scantron Driver.

Remember! Do not connect the scanner to the computer yet.

This is what you do:

  1. Open the Setup.exe file in the "Driver Installasjon" folder
  2. Follow the onscreen instructions
  3. Select scanner: "iNSIGHT 20 PLUSS"
  4. Complete the calibration procedure
  5. Select "Run Calibration" and follow the onscreen instructions


Step 2

Install ScanToolPluss

This is what you do:

  1. Open the Scantoolplussruntime.exe file from the "Scantoolplug Installasjon" folder
  2. Follow the onscreen instructions
  3. When this is done, you will not get any message, the program closes.


Step 3

Install Inspera Scan

This is what you do:

  1. Open the Setup.exe file in the "InsperaScan Installasjon" folder
  2. Follow the onscreen instructions
  3. When the installation is complete you will be able to open the Inspera Scan application




  • No labels